Rivet

• Miniature Rivets

  Our miniature rivets are designed for very small spaces. The smallest diameter is 2 mm, and the shortest length is 4 mm. These tiny rivets are commonly used in mobile phones, camera lens modules,...

  Read More
• Flat Head Steel Rivets

  One farm equipment exporter approached us because his machine covers vibrated heavily outdoors. Standard rivet heads came loose and protruded, allowing branches to pull them off. We designed our...

  Read More
• Countersunk Solid Rivets

  We assisted a heavy truck chassis modification company that needed to attach a 5 mm steel plate to the frame rail. A standard rivet head was too tall, hitting pipes and wires. We recommended our...

  Read More
• Slotted Rivet

  Our slotted rivet has one or more circular grooves on the shaft. These grooves create a mechanical lock during installation. This lock is much stronger against vibration and high loads than normal...

  Read More
• Semi-tubular Rivet

  Our semi-tubular rivet has a solid head and a hollow tail. This design gives you the strength of a solid rivet and the easy installation of a hollow one. The solid head takes high shear forces....

  Read More
• Flat Rivets On Both Sides

  Our flat rivets on both sides feature smooth, flat ends. This design leaves no sharp edges, making them ideal for car body panels, interior trim parts, and home appliances. The smooth surface will...

  Read More
• Hollow End Rivets

  Our hollow end rivets feature a hollow center, making them much lighter than solid rivets. Only a small force is needed to roll the end during installation, making them ideal for soft materials...

  Read More
• Double-headed Rivet

  A car seat recliner customer approached us needing a single rivet to serve as both a shaft and a stop. Standard rivets could not meet this requirement. We designed a product for him: the larger...

  Read More
• Flat Rivet

  Our flat rivet has a very thin head. The head thickness is about half of a normal rivet. But the head diameter is larger. This larger area spreads out the force. The pressure per square mm drops a...

  Read More
• Flat Head Step Rivet

  A leading wiper motor manufacturer approached us because one or two of his rivets often had varying heights after assembly, resulting in poor wiper blade performance. We supplied our flat head...

  Read More
• Step Rivet

  A car wiper system customer approached us because his wiper arm required a shaft to connect two parts. Standard rivets had no step, making it impossible to control installation depth. We designed...

  Read More